The Enfora Mini MT is an economy priced covert tracker. Ideal for surveillance, the Mini MT with its assisted-GPS technology can be placed in a glove compartment, under a seat or in a 'Slap & Track' case attached beneath a vehicle. Note: The Mini MT is not suitable for embedded cargo tracking.
The Enfora Mini MT works worldwide where ever there's GSM/GPRS cellular coverage. The combination of autonomous location technology and globally available wireless communications provide a covert cargo security device capable of working and roaming globally. The Enfora Mini MT conserves its battery power by remaining dormant until its motion sensor is triggered; at this point it becomes active and starts reporting its position as programmed. With the standard factory battery, the Enfora Mini MT delivers position updates every few minutes for 10-12 hours while in motion. With an FSN extended battery accessory, the in-motion battery life can be extended to over 150 hours!
Although the Enfora Mini MT can be placed covertly inside or outside a vehicle, be sure to verify performance in a given location. Glass, plastic, wood do not impede GPS signals. The Mini MT cannot be embedded in typical cargo like the Sendum PT200. The Enfora Mini MT works worldwide wherever there is a GSM/GPRS cellular network; over 220 countries around the world have GSM/GPRS coverage.
FEATURES & BENEFITS
- Small, rugged, water-resistant housing – place unit outside or inside.
- Internal antenna – hide unit almost anywhere (with a clear view of the sky).
- Broad usage – works in many countries/areas around the world.
- Over-the-air device management. Re-program unit either directly or via the Internet.
- Battery – standard and extended options available.
- Programmable application button – initiate internal geo-fence or other custom programs.
TECHNOLOGY
- 3GPP A-GPS standards compliant.
- Integrated battery: 1.3 AHr Li-Ion
- Cellular E911 GPS reference service.
SPECIFICATIONS
- Size: 3.95” x 2.32” x 1”
- Weight: 4.8 oz
- Enclosure: Plastic, water-resistant.
- Indicator: Dual-colored LED (red and green).
- Temperature
- Operating: -30º to +70º C
- Storage: -40º to +85º C
- Humidity: <95% non-condensing.
RELATED SERVICE PLANS
This page lists the prices for purchasing Enfora Mini MT package tracking units. There are separate monthly fees for the FSN Service Plans.
- FSNtracks: This software is used to track the movements of the tracking device.
Equipment Pricing
| Enfora Mini MT Package Tracker w/1.3 AHr Li-Ion Battery | $289.00 |
| KORE SIM Card w/International Roaming Enabled | $25.00 |
Extended Batteries
| FSN 10.4 AHr (3.7V) 4-Cell Li-Ion Extended Battery w/Latch Connector | $149.00 |
| FSN 15.6 AHr (3.7V) 6-Cell Li-Ion Extended Battery w/Latch Connector Mini MT Printed | $199.00 |
Printed Circuit Board (PCB) for FSN Extended Battery Options
Custom printed circuit board (PCB) required for each Mini MT w/extended battery option. | $39.00 |
Chargers
Portable Wall Charger & Cables for Mini MT and FSN Extended Batteries
Includes cable for extended battery options and adapter for Mini MT. Has status LED: red while charging, green when fully charged. | $49.00 |
Portable USB Car Charger (No cables included.)
Must use cables from Portable Wall Charger. | $19.00 |
Cases
Pelican 1010 Case w/Foam Insert (Unpainted)
Can hold one Mini MT only. Unpainted. Has four 50 pull-pound magnets. | $19.00 |
Magnetic 'Slap & Track' 1010 Case w/Foam Insert (Painted)
Can hold one Mini MT only. Exterior painted to blend with vehicle underside. Has four 50 pull-pound magnets. | $69.00 |
Pelican 1030 Case w/Foam Insert (Unpainted)
Can hold one Mini MT and one FSN Extended Battery option. Unpainted. Has five 50 pull-pound magnets. | $25.00 |
Magnetic 'Slap & Track' 1030 Case w/Foam Insert (Painted)
Can hold one MiniMT and one FSN Extended Battery option. Exterior painted to blend with vehicle underside. Has five 50 pull-pound magnets. | $79.00 |
14" Cable Ties - Black (Qty. 100)
Precautionary recommendation to prevent Pelican cases from opening accidentally. | $19.00 |
| Foam Insert Replacements for Pelican Cases (Qty. 5) | $9.00 |
NOTICES
- Multiple covert package trackers are recommend for larger loads.
- Each 'Slap & Track' magnet is certified at 50 lbs. of pull force. The pull force is tested by placing the magnet between two thick plates of alloy steel. One plate is attached to a force gauge which records the tensile force on the magnet. The plates are pulled apart until the magnet disconnects from one of the plates. The peak value is recorded as the "pull force". Applications working in shear force will support approximately 1/3 of the stated pull force value.
- Listed prices are effective as of July 1, 2008.